Please click on the image of the desired drawing to open the drawing in a new window or right-click (option+click for Mac) and the select “Save Link“
See how SmartVent works as intake and as an exhaust vent with this 3d interactive. Make sure you download it so you can show your customers exactly how our ventilation solves almost every ventilation issue.
Product and Application Drawings
SmartVent End Caps are 10.5″ square tapered ventilation pieces that seamlessly blend with Smartvent to give the roof a more aesthetic and clean finish to your intake ventilation project. (Do not use SmartVent End Caps at the rake edges)
The New, Patent-Pending ‘Universal’ SmartVent End Cap can be installed Right Side or Left Side, as you begin your SmartVent run or end the run. Designed with the contractor in mind, this easy to install end cap makes working with SmartVent simple and cost effective. Use it to end a SmartVent run near a dormer, valley, hip, chimney or skylight. Use it to begin a SmartVent run other than at the rake edge. At the rake edge, wrap SmartVent fabric around a full piece of SmartVent as shown in the SmartVent directions.
The SmartVent End Cap ‘tapers’ the SmartVent back down to the roof. All that you need to do is nail it down to the roof. Period! The fabric is already attached at the factory for right hand or left hand installations.
Most houses with ridge vents do not have the proper soffit ventilation required because attic insulation blocks the
soffit vents. SmartVent allows cooler air to enter under the shingle, through the 1″ roof slit and out the ridge
vent providing superior air flow and attic cooling.
Click here for an expanding list of SmartVent Dealers. If no dealer is located near you please give us a call at 1-800-622-4455 and we will be happy to locate a dealer for you.